Where to source twin carb air filters?
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Where to source twin carb air filters?
Ive recently aquired a factory twin carb air cleaner for my twin down draft solex carbs. I know a few other members here are running the factory twin setups, but where can i source a air filter element?
The fella behind the counter at repco was a little offended today, I took in the air cleaner, and asked to see a subaru L series air filter... he refused and said 'whats it for'.
I then proceded to tell him that I was trying to find a element for a twin carb galant, he kept insisting that he could get one, even though i assured him he wouldnt be able to, and guess what he couldnt lol.
The fella behind the counter at repco was a little offended today, I took in the air cleaner, and asked to see a subaru L series air filter... he refused and said 'whats it for'.
I then proceded to tell him that I was trying to find a element for a twin carb galant, he kept insisting that he could get one, even though i assured him he wouldnt be able to, and guess what he couldnt lol.
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
I was going to suggest the old Subaru, lol, what about TM-N carby Magna, Nimbus, Cordia? RYCO Part number A341.
http://www.supercheapauto.com.au/online ... pid=155654
http://www.supercheapauto.com.au/online ... pid=155654
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Where to source twin carb air filters?
it does not have to be a factory filter, as long as it fits ok, havent researched the carby magna filter. anyone at least got a part number for the factory filter?
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
I'm assuming you only want to use the original aircleaner housing for the sake of originality ? (because they have a really small opening & are seriously restrictive to air flow .... )
I have a vague recollection that early twin carb Mazda 323 / Ford Laser filter is pretty close ?
Another better option (which a mate did on his LA rally car years ago) would be to get one custom made by Unifilter .... mesh cage with foam cover. They will make filters to any size/shape you specify. He had an original paper one and just sent them the dimensions & a tracing of the shape.
I have a vague recollection that early twin carb Mazda 323 / Ford Laser filter is pretty close ?
Another better option (which a mate did on his LA rally car years ago) would be to get one custom made by Unifilter .... mesh cage with foam cover. They will make filters to any size/shape you specify. He had an original paper one and just sent them the dimensions & a tracing of the shape.
Re: Where to source twin carb air filters?
talk to these guys, the one they made me is at least 15 years old now....
http://www.uniflow.com.au/contents/en-u ... filter.pdf
http://www.uniflow.com.au/contents/en-u ... filter.pdf
"can I put Corolla pistons in my Anchortron with a Hyundai head? will it do better burnouts with 40 solex's? "...... Im so needing coffee...
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Where to source twin carb air filters?
its a daily driven car, originality not performance
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
were talking about the internal element? or the outer bit you can see? cause Im talking about the inner element you cant see, how's that going to effect originality
"can I put Corolla pistons in my Anchortron with a Hyundai head? will it do better burnouts with 40 solex's? "...... Im so needing coffee...
- DanTurboLancer
- Posts: 1382
- Joined: Wed Mar 25, 2009 1:19 pm
- Location: Newcastle N.S.W Australia
Re: Where to source twin carb air filters?
I am actually trying to find a filter to drop in the twin carb factory air box too.
I went to Repco the other day and they had a KB Laser twin carb filter on the shelf.
I took all measurements and they are actually longer, wider, and thinner height wise than the factory 4G32 one...
If you made rubber spacers to take up the height difference,
and cut the small filter locating lugs out of the base housing, i guess you could make it fit??
I went to Repco the other day and they had a KB Laser twin carb filter on the shelf.
I took all measurements and they are actually longer, wider, and thinner height wise than the factory 4G32 one...
If you made rubber spacers to take up the height difference,
and cut the small filter locating lugs out of the base housing, i guess you could make it fit??
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Where to source twin carb air filters?
the twin carb laser one they showed me today was oval but nearly round if that makes sense.. the L series one was too long and too narrow.
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
I'm not sure if this would be of any help top you but the ryco website has in their catalogue section where you can try to search for a particular filter from a set of dimensional ranges.
http://www.rycofilters.com.au/catalogue/dimension
I used it to find a filter for my GB as for some reason the standard catalogue filter was too short. Ended up having to use a valiant filter instead which fitted perfect.
http://www.rycofilters.com.au/catalogue/dimension
I used it to find a filter for my GB as for some reason the standard catalogue filter was too short. Ended up having to use a valiant filter instead which fitted perfect.
'72 GB Galant Sedan nanna spec daily
'85 GN Sigma Wagon 4g63 SOHC Turbo almost ready for the road
'74 GC Galant Coupe long term project
'85 GN Sigma Wagon 4g63 SOHC Turbo almost ready for the road
'74 GC Galant Coupe long term project
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Where to source twin carb air filters?
wow thats awesome thanks woops will give it a go!
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
Maybe try a filter from a Nissan L-series four with the dual SU's (180B/200B SSS)? The aircleaner looks to be a similar shape, so the filter might be close as well?
-Josh.
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
-
- Posts: 145
- Joined: Mon Mar 23, 2009 10:47 pm
Re: Where to source twin carb air filters?
Just try the easist one. SUBARU
Re: Where to source twin carb air filters?
My dad found 2 for sale on ebay UK. The brand is VIC air filter. On the box it has A-322 and also OEM No. MD603117.
When I googled this second no. I managed to find this: http://www.oscaro.com/filtre-a-air-knec ... 133195-8-p
and this
http://www.pzt-filter.de/teichmann/akti ... _2_xls.pdf
When I googled this second no. I managed to find this: http://www.oscaro.com/filtre-a-air-knec ... 133195-8-p
and this
http://www.pzt-filter.de/teichmann/akti ... _2_xls.pdf
Last edited by Nath76LA on Thu Oct 25, 2012 8:02 pm, edited 1 time in total.
1976 Galant Hardtop
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: Where to source twin carb air filters?
thanks for the link VERY helpful, trying to cross reference some numbers now, according to this http://car-cas.ru/price/AMC%20Filter/MA-486?typ_id=6747 its the same as a corona air filter...
BUILT NOT BROUGHT BY ALGIE.
Re: Where to source twin carb air filters?
This page any good to anyone?
http://www.autopartoo.com/oem/mitsubishi/md603117.html
http://www.autopartoo.com/oem/mitsubishi/md603117.html
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: Where to source twin carb air filters?
If haven't found try ford XC. That's what I have.
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: Where to source twin carb air filters?
I actually got one from a magna to fit
Re: Where to source twin carb air filters?
Did the Magna one work okay?
Re: Where to source twin carb air filters?
Yeah I never used it but cause once the carbs were on the oil filler bit was in the way