advice needed
advice needed
hey guys. i got my tie_rod end, idler arm, pitman arm replaced and wheel alignment at pedders on friday. drove the car today and its ony got half steering lock turning right, turns left ok but not full lock. WOT HAVE THEY DONE WRONG?
-
C_Fernance
- Posts: 728
- Joined: Tue Mar 17, 2009 1:19 am
- Location: Central Coast
Re: advice needed
Sounds like they didn't have the steering box centered when they put the pitman arm on. It's on a spline like the steering wheel and can go on in a heap of different positions.
-
Sigmaproject
- Posts: 1143
- Joined: Sun Mar 22, 2009 7:11 am
- Location: Maitland NSW
Re: advice needed
I guess the 1st year apprentice did it un-supervised 
If you can get the pitman arm off the steering box with the wheels straight ahead you could centre it yourself
If you can get the pitman arm off the steering box with the wheels straight ahead you could centre it yourself
-
81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: advice needed
You would hope that is the case haySigmaproject wrote:I guess the 1st year apprentice did it un-supervised
If you took it somewhere to get done, take it back.
Nick.
Old school Mitsu's, its not a hobby; it's a life style.
-
crystalmeths
- Posts: 395
- Joined: Wed Mar 18, 2009 7:45 pm
- Location: Dapto
Re: advice needed
take it back and tell them to do the f@#king job that you have already paid for 
Re: advice needed
Take it back, or name the place on the forum so we all know not to go there.crystalmeths wrote:take it back and tell them to do the f@#king job that you have already paid for
I'm here for a good time, not a long time !
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]
GJ Rally Sigma, 2.6 Haltech MPI [SOLD]