3.0 V6 ???

This section is for talk about anything to do with everything in the engine bay.
Post Reply
NateD
Posts: 12
Joined: Mon Aug 03, 2009 2:11 pm

3.0 V6 ???

Post by NateD »

Does anyone know if the Mitsubishi 3.0L V6 engine (Montero, 3000GT, etc.) will bolt to the manual transmission that came with the 2.6L?
Top
User avatar
karl_2ltgc
Posts: 312
Joined: Mon Mar 23, 2009 8:38 pm

Re: 3.0 V6 ???

Post by karl_2ltgc »

No.
Top
A112H
Posts: 7681
Joined: Tue Mar 24, 2009 5:01 am

Re: 3.0 V6 ???

Post by A112H »

^^^ What Karl said
Top
shuggy
Posts: 2269
Joined: Tue Mar 24, 2009 12:35 am
Location: Perth, WA

Re: 3.0 V6 ???

Post by shuggy »

gaffa tape ;)
Top
User avatar
DragonCypher
Posts: 206
Joined: Tue Mar 17, 2009 7:23 am
Location: Brisbane, QLD
Contact:
Contact DragonCypher

Re: 3.0 V6 ???

Post by DragonCypher »

shuggy wrote:gaffa tape ;)

If it moves and it shouldn't, duct tape
It it doesn't move and it should, WD40

anything else - use a hammer 8-)
if not.. try a bigger hammer
'81 GJ Scorp: Donated to a mate for a 2JZ Turbo project.
'84 Honda VT250F Integra: Daily transport, mountain racer and track bitch all in one.. damn slow in a straight line though
Future Project (on hold until I move to Melbourne in July): 2.6L Wideblock Astron 2 - Eaton M90 supercharger, draw through 45DCOE Weber.

Image
Top
Paddles
Posts: 405
Joined: Wed Mar 18, 2009 6:41 pm
Location: Hobart, Tasmania

Re: 3.0 V6 ???

Post by Paddles »

you need a gear box out of a triton that came with 6g72 for a rear wheel drive. they are hard to find and quite expensive.
'84 GL Scorp, Mildly Worked 2.6 With Sigma Turbo Setup.
Top
shuggy
Posts: 2269
Joined: Tue Mar 24, 2009 12:35 am
Location: Perth, WA

Re: 3.0 V6 ???

Post by shuggy »

DragonCypher wrote:
shuggy wrote:gaffa tape ;)

If it moves and it shouldn't, duct tape
It it doesn't move and it should, WD40

anything else - use a hammer 8-)
if not.. try a bigger hammer

if all else fails, can of fuel and a box of matches ;)
Top
Post Reply

Return to “Engine”