worked 2.6 twin 45 dcoe tuning
worked 2.6 twin 45 dcoe tuning
hi all im currently building a worked 2.6 with a camtech stage 3 cam,magna head, 10.1 comp,balance shafts removed, 2.5' sports exhaust for my gd galant iv got twin 45 dcoe's for it and i want to know what jets,chokes to use to suit my setup thanks
Last edited by nig087 on Thu Aug 16, 2012 8:45 pm, edited 1 time in total.
Re: worked 2.6 twin 45 dcoe tuning
hi all iv finished building the worked 2.6 with twin 45 dcoe's as above i like to know what jets,chokes i can use on my setup thanks
-
81GL
- Sigma-Galant Police (Global Mod)
- Posts: 912
- Joined: Mon Mar 23, 2009 7:27 am
- Location: Mildura Sunraysia Vic
Re: worked 2.6 twin 45 dcoe tuning
Pretty unlikely you will be able to find out the 'perfect' combination of parts for your set up.
How ever, if you are only after a ballpark figure to start with & see how it goes, then send these guys an email
http://www.dellorto.co.uk/
they deal mainly with Dellorto's but do stock all weber parts as well.
They were very helpful to me in the past and were able to recommend a starting point.
Have you got any tuning books? As in outlining how to tune the carb's? If not then I'd be looking to purchase something along the lines of:
http://www.dellorto.co.uk/merchandise/p ... ectionID=7
Good luck.
Nick.
How ever, if you are only after a ballpark figure to start with & see how it goes, then send these guys an email
http://www.dellorto.co.uk/
they deal mainly with Dellorto's but do stock all weber parts as well.
They were very helpful to me in the past and were able to recommend a starting point.
Have you got any tuning books? As in outlining how to tune the carb's? If not then I'd be looking to purchase something along the lines of:
http://www.dellorto.co.uk/merchandise/p ... ectionID=7
Good luck.
Nick.
Old school Mitsu's, its not a hobby; it's a life style.