Page 1 of 1
worked 2.6 twin 45 dcoe tuning
Posted: Sun Jul 22, 2012 9:08 pm
by nig087
hi all im currently building a worked 2.6 with a camtech stage 3 cam,magna head, 10.1 comp,balance shafts removed, 2.5' sports exhaust for my gd galant iv got twin 45 dcoe's for it and i want to know what jets,chokes to use to suit my setup thanks
Re: worked 2.6 twin 45 dcoe tuning
Posted: Thu Aug 16, 2012 8:43 pm
by nig087
hi all iv finished building the worked 2.6 with twin 45 dcoe's as above i like to know what jets,chokes i can use on my setup thanks
Re: worked 2.6 twin 45 dcoe tuning
Posted: Sat Aug 18, 2012 6:22 pm
by 81GL
Pretty unlikely you will be able to find out the 'perfect' combination of parts for your set up.
How ever, if you are only after a ballpark figure to start with & see how it goes, then send these guys an email
http://www.dellorto.co.uk/
they deal mainly with Dellorto's but do stock all weber parts as well.
They were very helpful to me in the past and were able to recommend a starting point.
Have you got any tuning books? As in outlining how to tune the carb's? If not then I'd be looking to purchase something along the lines of:
http://www.dellorto.co.uk/merchandise/p ... ectionID=7
Good luck.
Nick.