Question on ratios

This section is for talk about anything to do with transmission or drivetrain.
Post Reply
User avatar
havocgtr
Posts: 58
Joined: Tue Mar 31, 2009 11:51 pm
Location: Townsville QLD

Question on ratios

Post by havocgtr »

can anyone help me with the ratios for a stock scorpion diff its disc brake and a banjo other than that i have no idea its in a gk sigma if that helps i worked out the ratio using a online calc and it reckons about 2.7:1 but i didnt think they came in that low a ratio so any info would be great thx in advance
1981 Scorp NOW Turboed , T04B , Magna Head , Recurved Dizzy , No balance shafts , :D
1992 Triton 2WD + Extractors & 2 1/4" exhaust + 32/36 weber = Daily driver and run around family car
webby
Posts: 1644
Joined: Thu Apr 02, 2009 10:38 am
Location: Parkes, NSW

Re: Question on ratios

Post by webby »

Mine's 3.308:1, I'd assume that's what they all are apart from 8-bolt GE's which are around 3.5 for auto and 3.9 for manual.
-Josh.
Image
Daily: 7/96 EF Falcon, 4.0 SOHC, BTR95LE, 3.45:1 LSD/Lukey extractors, full 2.5” exhaust, EL intake, Tickford snorkel, 87DA cam, AU injectors, shiftkits.com.au single stage kit. PB 14.93@91mph.
Project: Red '81 Scorpion-http://www.sigma-galant.com/viewtopic.php?f=46&t=11889
User avatar
DragonCypher
Posts: 206
Joined: Tue Mar 17, 2009 7:23 am
Location: Brisbane, QLD
Contact:

Re: Question on ratios

Post by DragonCypher »

I've got a GJ scorpion, 3.308 in the service manual.. but I recently counted the teeth on the gears and got ~3.2 (counted 3 times because I knew it wasnt right..)

According to the manual 3.308 is the lowest they come in, no matter what country or gearbox.
'81 GJ Scorp: Donated to a mate for a 2JZ Turbo project.
'84 Honda VT250F Integra: Daily transport, mountain racer and track bitch all in one.. damn slow in a straight line though
Future Project (on hold until I move to Melbourne in July): 2.6L Wideblock Astron 2 - Eaton M90 supercharger, draw through 45DCOE Weber.

Image
BIG26L
Posts: 253
Joined: Sun Mar 22, 2009 7:05 pm
Location: Sydney

Re: Question on ratios

Post by BIG26L »

3.3, 3.55 for scorpion
3.9, 4.22, 4.6 and 4.8 from early starion, express, pajero and L200 will also fit 10 bolt scorpion centre.
Post Reply