4G32 solex/ mukini twin carbs close up shots and info......
4G32 solex/ mukini twin carbs close up shots and info......
Just in case anyone is interested.
Here are some close up photos of my Solex/ Mukini Twin Carb set up.
They are 28-32DIDSA-A1 (Twin) as apposed to the standard carb 28-32DIDTA-9(M/T) or 28-32DIDTA-9(A/T)
They have smaller jets and a softer spring in in the depression camber that controls the vacuum secondaries.
I've included technical Info from a book that I have for those that are interested.
Here are some close up photos of my Solex/ Mukini Twin Carb set up.
They are 28-32DIDSA-A1 (Twin) as apposed to the standard carb 28-32DIDTA-9(M/T) or 28-32DIDTA-9(A/T)
They have smaller jets and a softer spring in in the depression camber that controls the vacuum secondaries.
I've included technical Info from a book that I have for those that are interested.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Does anyone have a spare set of these lying around? Maybe even the original air cleaner?
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
They're not overly hard to find ... I have a set gathering dust in the shed, plus I know where there are a number of other sets.
They are just the same pretty crap carb as stock of course, only you have 2 of them on the car !
Just my opinion of course ... certainly they are better than a single stock carb, but the advice I have been given by Dinta Officer (and few people know more about building quick Galants, at least for rallying) is that a single 34ADM is a much better option than the twin Mikuni/Solex setup.
The genuine aircleaner assemblies are pretty hard to source in my experience - and the elements even more so - but I don't know why you would bother, unless it was purely for the sake of originality ? The intake on the stock assembly is pretty small.
I am considering trying a pair of 32/36 DFV Webers on the twincarb manifold .... Dinta reckons it might be better again than a single 34ADM. Only way to tell will be to do it & dyno it, I guess.
They are just the same pretty crap carb as stock of course, only you have 2 of them on the car !
Just my opinion of course ... certainly they are better than a single stock carb, but the advice I have been given by Dinta Officer (and few people know more about building quick Galants, at least for rallying) is that a single 34ADM is a much better option than the twin Mikuni/Solex setup.
The genuine aircleaner assemblies are pretty hard to source in my experience - and the elements even more so - but I don't know why you would bother, unless it was purely for the sake of originality ? The intake on the stock assembly is pretty small.
I am considering trying a pair of 32/36 DFV Webers on the twincarb manifold .... Dinta reckons it might be better again than a single 34ADM. Only way to tell will be to do it & dyno it, I guess.
Last edited by davetrees on Thu Oct 08, 2009 8:08 pm, edited 1 time in total.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
That's pretty much the reason I want the aircleaner, originality. I used to have one but sold it with the car, bad mistake (selling the car at all)davetrees wrote:They're not overly hard to find ... I have a set gathering dust in the shed, plus I know where there are a number of other sets.
They are just the same pretty crap carb as stock of course, only you have 2 of them on the car !
Just my opinion of course ... certainly they are better than a single stock carb, but the advice I have been given by Dinta Officer (and few people know more about building quick Galants, at least for rallying) is that a single 34ADM is a much better option than the twin Mikuni/Solex setup.
The genuine aircleaner assemblies are pretty hard to source in my experience - and the elements even more so - but I don't know why you would bother, unless it was purely for the sake of originality ? The intake on the stock assembly is pretty small.
I am considering trying a pair of 32/36 DFV Webers on the twincarb manifold .... Dinta reckons it might be better again than a single 34ADM. Only way to tell will be to do it & dyno it, I guess.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
One more point.
These carbs sound good on a 4G32, be the judge yourself, come on the Sydney to Newcastle cruise.
These carbs sound good on a 4G32, be the judge yourself, come on the Sydney to Newcastle cruise.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
I'd love to, but it's a long hike from Melbourne to Sydney.. the GB could do with a leg stretch. Get plenty of pics for us ;)
Re: 4G32 solex/ mukini twin carbs close up shots and info......
.
.
Yea, was a set on ebay not long ago was going to bid on them but the
seller withdrew them from sale, some blokes like to put socks in their
shorts I would prefer a pair of monkeys (mukinis) under the bonnet of my
70's mitsubishi (for the right price of course).
.
.
.
Yea, was a set on ebay not long ago was going to bid on them but the
seller withdrew them from sale, some blokes like to put socks in their
shorts I would prefer a pair of monkeys (mukinis) under the bonnet of my
70's mitsubishi (for the right price of course).
.
.
.
3x la lancer 2door
2x gc galant hardtop
1x gc galant wagon
.
3x la lancer 2door
2x gc galant hardtop
1x gc galant wagon
.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Does anyone have any idea of the availability of rebuild kits for these? If I understand correctly, the kit for the single 28-32DIDTA will also work, but seeing as the only listing i can find on ebay is $84 deliverd, AND I would need two, are there any other options that someone could direct me to?
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Yes the single kits are the same. I have put them through mine.Hotwire wrote:Does anyone have any idea of the availability of rebuild kits for these? If I understand correctly, the kit for the single 28-32DIDTA will also work
I saw a kit on there just the other day for $48.Hotwire wrote:but seeing as the only listing i can find on ebay is $84 deliverd, AND I would need two, are there any other options that someone could direct me to?
I bought mine from Repco (before I got on the net) for about $60 each.
You can do better then that if you shop around abit.
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
i had two sets of these a few months ago, still have one set if anyone wants..
am in melbourne
am in melbourne
Re: 4G32 solex/ mukini twin carbs close up shots and info......
This is some info I'll have to look up again in the future. I am thinking about putting a 4G32 with twin Solex or Weber into my Lancer. It all depends on how rich I am at the time.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
the twin downs are a cheap option, and easy to find and get parts for.. any motorbike shop will have jets for them for about 5 bucks a pop..
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Ive got a a set complete with air cleaner. Taken straight off the car.
Need a real good clean. in the switch.
0402-,793.,619
Need a real good clean. in the switch.
0402-,793.,619
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 4G32 solex/ mukini twin carbs close up shots and info......
DIBS gus! how much pm me please
BUILT NOT BROUGHT BY ALGIE.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
75gus wrote:Ive got a a set complete with air cleaner. Taken straight off the car.
Need a real good clean. in the switch.
0402-,793.,619
Sounds good, but I am still months from needing one, but looks like astronturbo77 might be interested.astronturbo77 wrote:DIBS gus! how much pm me please
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 4G32 solex/ mukini twin carbs close up shots and info......
cottees: i already have a running set on my car... only want the peroid correct air filter housing. i will separate the carbs if you want?
BUILT NOT BROUGHT BY ALGIE.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
If that was you who just called 77 then they are yours.
Pics on the way. It will take me a week to work out how to get them on here again
Pics on the way. It will take me a week to work out how to get them on here again
-
- Sigma-Galant Police (Global Mod)
- Posts: 1356
- Joined: Thu Mar 26, 2009 8:09 pm
- Location: Hobart Tasmania
Re: 4G32 solex/ mukini twin carbs close up shots and info......
it was me, i just emailed you, send them through email if you want?
BUILT NOT BROUGHT BY ALGIE.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
I have just got a 4G1, 4G3 and 4G5 manual, and it has some more info on the twin carbs. I'll post some pics soon.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
thermostat housing part number????
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: 4G32 solex/ mukini twin carbs close up shots and info......
I'll scan in some more pages soon.
Can't find that in the Manual at the moment, but isn't it a WO22S?shuggy wrote:thermostat housing part number????
Re: 4G32 solex/ mukini twin carbs close up shots and info......
nah, you need a mirror image of that one! exactly the same but the outlet facing the other hole
76' GD A57 rebuild Full Album - http://www.facebook.com/album.php?aid=1 ... 29ef74e1d8
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Here is the Kilkenny Castings Catalogue. There should be something in here that would fit :
http://www.derek.com.au/kilkennycastingcatalogue.pdf
http://www.derek.com.au/kilkennycastingcatalogue.pdf
Re: 4G32 solex/ mukini twin carbs close up shots and info......
I may release PDFs of the Mitsubishi Celeste/Lancer Station Wagon 1980 Workshop Manual (WE890346) and the Mitsubishi 4G1, 4G3 and 4G5 1979 Workshop Manual (WE780576). I'd rather people go out and buy their own, but they aren't that easy to find/afford. But will release the PDFs for reference till a hard copy becomes available.
One thing I did notice is that the Aus-Spec Lancer LC's 4G32 has the same compression ratio as the 4G32GS, but with single carbie rather than twins.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Thought I'd share some pics of a twin setup that I SHOULD have bidded on while it was still on ebay.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
They are not complete
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
They were only $150, and it would be a start. It'll be quite a while before I'll be rebuilding the 4G32.75wagon wrote:They are not complete
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Don't bother with those old bits of junk. Ask yourself why no one used these since the 70's? For what these would cost you to get completed and reconditioned you could buy a new set of side draughts or quad throttle body Efi, both of which will get more power and the same sound as the antiquated down draughts.
Re: 4G32 solex/ mukini twin carbs close up shots and info......
Thanks for your opinion Galant_GTO.
If everyone had that opinion, these cars would already be at the crushers.
This topic is for those that want info on the carbs, if you don't want a set, then don't buy them.
I have them on my car because they are period correct, I don't care if webers, EFI or anything else would make it go better.
Dave...
If everyone had that opinion, these cars would already be at the crushers.
This topic is for those that want info on the carbs, if you don't want a set, then don't buy them.
I have them on my car because they are period correct, I don't care if webers, EFI or anything else would make it go better.
Dave...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G32 solex/ mukini twin carbs close up shots and info......
The Sigma GN I have, I am after more power with that, hence the EFI + SC. The Lancer LC on the other hand, I want to keep it stock, and any 'upgrades' I'd want to be from the same time. Hence EFI is out, and a stock twin downdraft carbie setup is in. I like EFI over carbie, but setting up a 'stock' carbie engine for the LC would keep it original, and also will teach me about carbies, which I know very little about. If I wanted much more power, and stay with the same displacement, I'd get an EFI setup off a 4G37, or try and squeeze a 4G92 MIVEC into the LC.Galant_GT0 wrote:Don't bother with those old bits of junk. Ask yourself why no one used these since the 70's?