Sigma-galant.com

Hi The wheel looks good . With the Galant were is the wiper switch ?
Oh like the colour of your car with the vinyl roof

Also, I wasn't aware that the Starion's came out with such a tall diff ratio....the best i heard was 3.9 (tho "apparantly", 3.5 are common) Your right i only purchased the LSD center from the states, no ring gear or pillion . Made it liter(cheeper) Then placed the scorp ring gear onto it ...

My 1978 Lancer hatch Was silver but now budget white. The car was fairly rust free the worst being around the battery. My plan is to rebuild the old giil without breaking the bank. Things that are done.... All new ball joints and bushes Sigma / Lancer front seats Reskined the dash mysalf Lc tail lig...

Not to shore were to post this but just a few questions... Doing some pre EFI prep work . l would like to do as much of the work as l can before the Satin comes out . things like high pressure fuel pump . can l install one inline now but leve the fuse out ( l don't think l need a surge tank ) Moving...

Love the ride , what more can l say. It has a good owner

Gear stick hole ?? Are thay all in the same spot ?

Thanks for your info but all sorted a while back. if only l had those sigma 2 callipers that Dan had in his pics, they would have solved my problem. Had to machine a calliper the thicker sigma 2 slid mount to fit in between disc and the strut mounting bracket .The match the right hand strut setup. A...

Will have a look at those magna callipers maybe for future use.
Cheers

HI all .... l decided to keep the Scorp hand brake cable and disc brake dust shields so to look a bit factory. The hand brake lever that l picked was from a Nissan Skyline . It has a mount to hold the outer tube of the cable . It has a small mod to make it bolt in without any mods to the car. The ax...

Hi Dan Looking at your picks..... The sigma 2 callipers that you have , do they have a date cast into the underside of the mounting slide a date ???? they look like the same callipers that l had . I damaged one of and tried to replace it with another sigma 2 calliper but found they were all as thick...

Hi Dan Looking at your picks..... The sigma 2 callipers that you have , do they have a date cast into the underside of the mounting slide a date ???? they look like the same callipers that l had . I damaged one of and tried to replace it with another sigma 2 calliper but found they were all as thick...

Hi all lve just about completed a scorpion diff conversion to my hatch . All is good except for the hand brake. The lancer has 2 cable pull but the scorp is one cable to the hand brake lever. My question is..... Will the scorp or gh sigma disc brake hand brake lever bolt into the Lancer .And if so h...

Hi About an LSD centre for the Scorpian diff . Thay are as every one says hard to find. Thay are getting old so how do you go with parts ? Bearings should be fine but what about the clutch plates can you get new ones ?? With mounting a Scorp diff in a lancer will the shocks foul on any part of the d...

The door rubbers from rotary products with the item number that l supplyied in one of my above post will fit an LB HATCH It looks like thay were made in the Philipians somewere, buy the look of the print on the packet. If you read his add he more or less states he make or gets anything. So many litt...

You sent him a good templates , very happy with the product .
Can we ask what other parts you have sent to be copyied End caps for lc bumpers and the over riders for lb bumpers would be good

Ok been out in the garage and have fitted the new door rubbers to a Lb hatch.
The rubbers are still list but are listed as La - Lb coupe door rubbers. When you open the add you will get more off an idea of what thay realy are for. Item No 130752266388 There is 8 left and thay DO FIT a Hatch

Sorry about the late reply but been on Easter Holidays. You will have to check for supply yoursalf!!! l would say yes.
Will fit mine tomorrow to see if thay realy fit well

Just puchased a set of door rubbers for my Lb hatch . Had a quick look to see if thay are correct, all looking good.
All the little posts are in the right places and looks right shape and lengh. Got them on Ebay from Phils Rotary Products
He also has Lb - Lc strut bearing plates as well brand new

Yep l know im in the wrong forum but heres the problem My old and trusted VN commodore wagon has been driving like its pist. Got a suspension check by Pedders'who said...... One of the problem could be shocks or top hat mounts. To me from under the bonnet thay look fine the rubber around the centre ...

All looking good Lindsay .Seen the extra pics you have posted up. Hope you have a little more room to work than before.
So the interia door cards etc.. black with blue ????

Are all the timing marks lining up on the belt or chain.
Intake manifold gasket sealed ok ?

http://i1122.photobucket.com/albums/l527/lance4862/Picture059.jpg If anybody is interested l can put up more pics Uses the lancer seat base,very easy . All bolt on , no cutting just swaping over May have been done before. Brings the seat down to the original lance cushion hight and the fabric color...

Sorry ,forgot about the calipers,thay were still on the car. The two sets off struts were on the ground side buy side but l fogot about the calipers.

Am l att least right about the bearing plates ?

The front end is all sorted. Replaced the front springs with Nissan Exa and changed the strut tops to 3 bolt gh type. These to 2 things has lowered the car by 20mm . What l did notice is from the top of the mounting plate to the bottom of the bearing on the strut tops there is a difference of 12 mm ...

Sigma at Jollies u Pull it Ringwood ,Looks good on on the conputer

http://i1122.photobucket.com/albums/l527/lance4862/Picture040-1.jpg http://i1122.photobucket.com/albums/l527/lance4862/Picture039-1.jpg Hi all Matt These are the pics of the springs . The 1 on the left is the original lancer and to the right is the sigma that was originally on the green struts. Why...

l think you guys are right. The car l have is one of the first lb hatches in aust . It now has green struts with the lbs springs on them. l put them in over a year ago. I forgot that the sigma springs were alot taller than the lancers. When l went to lower the car on the weekend l had the 3 types of...

Dave ,Thats what i thought. What l have done which l have to laugh is this... I wonted to lower the car but 1 inch. So being a tite arse l tryed to do it on the cheep. I went on line to the King spring online catalouge to the part nos. Found the lowered spring part number for a lb ,lc ..... Then loo...

HI all . One quick question before we go out for tea.

What is the difference between la springs,struts to the rest like lb , lc and gh struts and springs ?
If you lb-lc stuts on an la what springs would you you use ?

Went and orded a new set of spring eye bushers for my Lb Lancer. Got them home only to find thay are the wrong ones. 55 OSD. I need 45 OSD Thay were a special order at Super Cheap.Will try and take them back tomorrow. Just checking to see if anybody has 45 OSD super pro bushes in Melbourne that thay...