its an easy cheap way to secure hose/wires etc and also make things neater, it can also be used for ignition wires
you'll need a few quality cable ties and depending on what your doing you may just need to use normal ties or if you need to secure things to body/chassis etc you will need the push in ties
heres a demo of how i do it
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1174.jpg)
I use this type when mounting to body/chassis, just need to drill a 6mm hole and push them in
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1175.jpg)
First just loosely loop a tie around the thing you need to secure
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1176.jpg)
next loop another tie around the first tie like this
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1177.jpg)
pull the 1st tie until hoses are nearly touching the 2nd tie
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1178.jpg)
pull 2nd tie tight and there you have it
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1180.jpg)
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1181.jpg)
Heres some i done on my car using the push in ties
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1183.jpg?t=1307943450)
![Image](http://i796.photobucket.com/albums/yy248/Gassed250_album/SAM_1184.jpg)