Sigma-galant.com

hey the gyes at autosportdirect.com.au hav these strut tops
to suit almost any car around $460 pr thay are nolteck brand!

Great find, im sure these will be useful for heaps of people.


Cheers Matt

I think there a little expensive for what they are. I want to get something with a sealed thrust race bearing like these http://www.datsport.com/Camber_plates_w ... rings.html
there $560 and have no caster adjustment, but you get more for your $ i think? There 110 bolt spacing, but Ill spin it 180 and re drill/tap to suit our 100mm. I also want to modify them like cheaters done with a series of holes so that it can be turned around for camber also.




OR you could just get cheater to make you some like in your post, im sure cheater can do a good deal.
We have the measurements, and improved them to allow more adjustment,

I got cheater ones in my galant, they work good, and give about 4.5 degrees camber on their full setting.

karl_2ltgc wrote:I got cheater ones in my galant, they work good, and give about 4.5 degrees camber on their full setting.

for some fun we adjusted the sigma F/E to see what we could get it was over 7 1/2 deg neg camber
that with adjustable lower control arm bushes and my top caps
mind you with the tyre we run now it only needs about 3.5 deg but I pull on more caster



cheater tops fitted to a smelly 1600 datson

cheater wats a set of strut mounts worth for GD coupe? perhaps with a strut brace to suit? very interested

cheers mate

I'm getting the off the shelf k-mac ones for my GK, they offer three different models and are well priced

shuggy wrote:cheater wats a set of strut mounts worth for GD coupe? perhaps with a strut brace to suit? very interested

cheers mate

^^What shuggy said^^

sig2L wrote:I'm getting the off the shelf k-mac ones for my GK, they offer three different models and are well priced

i was gonna go with kmacs but stage 1s were the same price as noltecs but noltecs are better design
and 100% australian!