magna computer conversion.... im pretty X(
Posted: Sat Apr 26, 2014 4:51 pm
well I have finally got it to start,but its strange... I confirmed the tdc no1 with the thumb method and timed no1 on the C.A.S/dizzy but when I try to time it up, the light does not show my painted confirmed timing mark,but anothe minor non painted mark on the crank wheel. to this mark i can twist the dizzy to its extreem anticlockwise direction and the timing mark will go as far as 5dbtdc and idle rpms will lift but it still will only rev to maybe 2-2500rppm and pop and bitch and whinge. ive grounded the base timing lead on the loom, but the manual says the C.E.L will light as long as ive got that wire grounded ... which it doesnt....
I'm thinking its a possibility that becaus Ive used a large manifold TR computer with a small manifold from a TP, with a large 80mm factory TR T.B. that the intake flow characteristics are all messed up for the TR factrory computer...
But I still cant get past the timing...
Any ideas?
I'm thinking its a possibility that becaus Ive used a large manifold TR computer with a small manifold from a TP, with a large 80mm factory TR T.B. that the intake flow characteristics are all messed up for the TR factrory computer...
But I still cant get past the timing...
Any ideas?