Members Rides can be viewed here, remember when posting here to keep mechanical discussions for its appropriate forum.
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Wed Mar 18, 2009 6:45 pm
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
crystalmeths
Posts: 395 Joined: Wed Mar 18, 2009 7:45 pm
Location: Dapto
Post
by crystalmeths » Wed Mar 18, 2009 8:03 pm
that is awesome looking sigma love the rims
GC75
Admin
Posts: 2206 Joined: Tue Mar 10, 2009 8:30 pm
Location: Gold Coast, QLD
Post
by GC75 » Sat Mar 21, 2009 2:24 pm
clean vessel this one
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Wed Mar 25, 2009 12:11 pm
TUFSIG wrote: so clean that i used it in my banner hehe love gh turbos
Thanks for the compliment looks better in B&W though
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
tandanus
Posts: 606 Joined: Sun Mar 22, 2009 7:36 am
Location: NSW Central Coast
Post
by tandanus » Wed Mar 25, 2009 4:32 pm
amgis_obrut wrote: ....
Its pretty much standard appart from a set of 17" wheels 40mm lowering job and a 2 1/2" stainless exhaust....
Standard is good !
T.
The highest reward for a man's toil is not what he gets for it but who he becomes by it.
John Ruskin
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Wed Mar 25, 2009 10:21 pm
tandanus wrote: amgis_obrut wrote: ....
Its pretty much standard appart from a set of 17" wheels 40mm lowering job and a 2 1/2" stainless exhaust....
Standard is good !
T.
I know
Im not doing anything else to it appart from fixing anything that not 100%
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Wed Mar 25, 2009 10:44 pm
TUFSIG wrote: hey man how much power did the 2lts have from factory cause mine has some work done and running more boost and it goes on dyno soon
just wana get an idea what they made stock at the fly
http://www.sigmaturbo.com/sigmaturbo_008.htm
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Fri Mar 27, 2009 11:37 am
TUFSIG wrote: cheers man thanx forgot bout that site lol
so whats the plans for that other GH you bought
Im going to Orange tomorrow to get it, i'll be using a few trim bits and the boot lid off it for 197, and i'll put the stuff from 197 back on the white car, it will still be a tidy unit so i might put my turbo rims on it and let the missus drive it around
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Fri Mar 27, 2009 11:47 am
Yeah i'll end up selling and putting the cash into the engine for my Transit
I was almost going to sell 197 to fund the P-51 alloy heads and 1150cfm carb
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
GC75
Admin
Posts: 2206 Joined: Tue Mar 10, 2009 8:30 pm
Location: Gold Coast, QLD
Post
by GC75 » Fri Mar 27, 2009 11:54 am
nice how much ya getting that for?
also theres a sigma for sale in nowra with twin webbers, also one out culburra along the main road just before carlton crescent. Its the rare blue color to.
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
GC75
Admin
Posts: 2206 Joined: Tue Mar 10, 2009 8:30 pm
Location: Gold Coast, QLD
Post
by GC75 » Fri Mar 27, 2009 12:56 pm
TUFSIG wrote: is it a rare blue gsr with twin webers ?
that would be mad but im not in NSW
lol let me know if you wana sell the sig turbo love those thins ahaha
dunno havent seen under the hood of that one.
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Fri Mar 27, 2009 10:06 pm
vr4retrofit wrote: Why does it have Limited Edition written on the side? Is that factory?
I never seen that on any other sigma turbo.
It was dealer fitted as it was a display car (not a demo) in a WA Mitsubishi show room
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
DanTurboLancer
Posts: 1382 Joined: Wed Mar 25, 2009 1:19 pm
Location: Newcastle N.S.W Australia
Post
by DanTurboLancer » Wed Apr 01, 2009 7:35 pm
nice job man.
She came up well.
you should be proud!
DanTurboLancer
Posts: 1382 Joined: Wed Mar 25, 2009 1:19 pm
Location: Newcastle N.S.W Australia
Post
by DanTurboLancer » Wed Apr 01, 2009 7:36 pm
nice job man.
She came up well.
you should be proud!
DanTurboLancer
Posts: 1382 Joined: Wed Mar 25, 2009 1:19 pm
Location: Newcastle N.S.W Australia
Post
by DanTurboLancer » Fri Apr 03, 2009 6:13 pm
Im pretty sure they came with a quoted 115-118KW, and reading the manual at 20Degrees BTDC
But a higher flow exhaust, some boost, amd alittle tweaking will net you alot more.
Not forgetting from factory they had to tune them for economy, long lasting, and for drivabilty.
some simple mods and tweaking and you should pick up some easy KWs
Let us know what you end up with!!
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Sun Apr 10, 2011 8:16 pm
Well as of today i no longer own 197
She has been passed onto another enthusiast whom im sure will give her nothing but the best attention
Im really going to miss 197 and even shed a tear after dropping her off
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
Shifta
Posts: 1191 Joined: Mon Aug 06, 2012 2:35 pm
Post
by Shifta » Mon Apr 11, 2011 5:49 pm
Agreed! A great example of a Siggy Turbo - lets hope the new owner treats it nice!
ghuphill
Posts: 165 Joined: Sat Nov 06, 2010 3:09 pm
Location: nsw
Post
by ghuphill » Mon Apr 11, 2011 6:10 pm
some one give this man a hug.
A112H
Posts: 7681 Joined: Tue Mar 24, 2009 5:01 am
Post
by A112H » Mon Apr 11, 2011 7:34 pm
amgis_obrut wrote: Well as of today i no longer own 197
She has been passed onto another enthusiast whom im sure will give her nothing but the best attention
Im really going to miss 197 and even shed a tear after dropping her off
Need some tissues princess, lol?
I know it is hard to do, I miss my VR4
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Mon Apr 11, 2011 8:47 pm
Yeah cheers Jason I dont suppose you'd have any left
I'll pass on the hug thanks ghuphill lol
And yes she has gone to a very good home, i was worried about what might happen to her but after meeting the new owner and seeing the standard of their other cars I have no doubt that she will be just fine and with time even finer
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust
A112H
Posts: 7681 Joined: Tue Mar 24, 2009 5:01 am
Post
by A112H » Mon Apr 11, 2011 9:24 pm
My tissues are all sticky
Great to hear/read it has gone to a good home, home we see it on here again
GC75
Admin
Posts: 2206 Joined: Tue Mar 10, 2009 8:30 pm
Location: Gold Coast, QLD
Post
by GC75 » Thu Apr 14, 2011 10:40 pm
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
DanTurboLancer
Posts: 1382 Joined: Wed Mar 25, 2009 1:19 pm
Location: Newcastle N.S.W Australia
Post
by DanTurboLancer » Sat Apr 16, 2011 8:48 pm
Shame to let that one go!!
Is it someone from the site?
amgis_obrut
Posts: 1742 Joined: Wed Mar 18, 2009 6:26 pm
Location: Orient Point NSW
Post
by amgis_obrut » Sat Apr 16, 2011 9:14 pm
yeah i know dan
and yes she is still within the SG community
GH Sigma, 16" Mesh wheels, sports steering wheel and a V8 exhaust