Hi everyone,
just got a few technical questions
I've been running an old 4g32 galant 4 speed in my clubman for a few years now and are after more power.
1) Will a 4G35 or 37 head bolt on a 32?
2) Will a 4G63 or 64 bolt on the 32 4 speed?
I have a nissan s15 spec r sr20det engine and 6 speed box I could use for a conversion, but don't feel like chopping up the old girl to make her fit. I still really enjoy the noise of the 4g32! xD Just wondering what road I should take -.- Get more power out of 4G engines or convert :/ ???
4G Engine Questions
Re: 4G Engine Questions
Have a read of this topic for the answer http://japanesenostalgiccar.com/forum/v ... 4&p=178133Ubean wrote:1) Will a 4G35 or 37 head bolt on a 32?
Give this topic a read, it will answer all of your questions http://www.sigma-galant.com/viewtopic.php?f=93&t=2206Ubean wrote:2) Will a 4G63 or 64 bolt on the 32 4 speed?
Yeah, I'm not real keen on cutting them up, but I suppose depending on what outcome you're after (and what you can get your hands on) it's the only option.Ubean wrote:I have a nissan s15 spec r sr20det engine and 6 speed box I could use for a conversion, but don't feel like chopping up the old girl to make her fit. I still really enjoy the noise of the 4g32! xD Just wondering what road I should take -.- Get more power out of 4G engines or convert :/ ???
What sort of car do you have by the way?
Oh, and welcome to the forum
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: 4G Engine Questions
Hey mate! Welcome I'm not sure about the heads. But about the 4g63. Sohc ones are a mix and match of wide block and narrow block. So depends on which one you get. I think the dohc fwd ones are narrow. But again, you'd have to read the link to know for sure
Cheers,
Mick
Cheers,
Mick
N/A ALL THE WAY
Re: 4G Engine Questions
Dave, I've read that topic about engine upgrades. It has no point about a sohc na g63 from a rwd setup. But possibly that is covered by the starion engine? Already rwd, still the same block. But it would be handy to know what box can be used. I'm almost certain they're mix and match. Just a lucky dip so to speak
N/A ALL THE WAY
Re: 4G Engine Questions
So you can bolt a 37 head on a 32 block xD Probably a bit hard finding a 37 now days :/Have a read of this topic for the answer http://japanesenostalgiccar.com/forum/v ... 4&p=178133
are all the narrow block bell housing patterns are the same?Give this topic a read, it will answer all of your questions http://www.sigma-galant.com/viewtopic.php?f=93&t=2206
The car is a Locost Clubman like a kit car but made from the ground up from different parts etc. I track it on weekends so don't have to worry about rego and restriction
- BlueThunder
- Posts: 339
- Joined: Thu Oct 14, 2010 2:18 am
- Location: Antwerp
Re: 4G Engine Questions
A site with a lot of info about 4g63 is http://www.projectzerog.com
There you might find the answer, or on the site or on the forum...
There you might find the answer, or on the site or on the forum...
Re: 4G Engine Questions
Yea all narrow block boxes will fit on a narrow block. Vice versa with the wide blocks
N/A ALL THE WAY
Re: 4G Engine Questions
sohc 4g63 from a l200 is narrow, i just bolted one up to my narrow 5speed to replace a 4g32
spoto a 57 chev
...a 57 2 door
...a 57 2 door