looking at this Sigma on ebay and noticed that the locating pin on the strut towers have been ground off and the towers rotated 180 Degrees. I remember a guy on the site back in the day that had a really smick Scorpion that had done the same mod. Not looking to do it myself..but has anyone done it and then got a wheel alignment to check the result.
Would give it heaps of negative camber ..but must play havoc with the inside edge tyre wear.
Sigmaproject wrote:looking at this Sigma on ebay and noticed that the locating pin on the strut towers have been ground off and the towers rotated 180 Degrees. I remember a guy on the site back in the day that had a really smick Scorpion that had done the same mod. Not looking to do it myself..but has anyone done it and then got a wheel alignment to check the result.
Would give it heaps of negative camber ..but must play havoc with the inside edge tyre wear.
Of course I meant to say the STRUT TOPS have been rotated 180...NOT the TOWERS
Many moons ago I bought some Early Falcon adjustable cam bolts to create an adjustable bottom control arm. Just one of the many projects that never got off the ground