First find a factory tacho.
Stock clock dash cluster. (before shot)
Stock clock dash cluster removed.
What you need for conversion. Note, tacho needs gauge lense with no hole for clock reset/ adjust.
The wiring for factory clock.
Tacho gear v's Clock gear
How to wire the new tacho up.
Tacho installed in cluster.
Instrument cluster installed in housing, all other wires hooked back up
Gauges/ lenses swapped and ready to install back into dash.
You need to get this green wire that is folded back and taped over.
Hook the green wire up to the neg on the coil.
Testing to see if it works, and it does
That's it. Just remember, if you buy a tacho, get the lense cover to go with it...
Dave
How to install a factory tacho in non tacho GC/ GD.
How to install a factory tacho in non tacho GC/ GD.
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
Re: How to install a factory tacho in non tacho GC/ GD.
what if you got the full poverty pack G
AKA my wagon thats has no clock or taco just plastic ?
does the wire still exsist back there in the wiring loom?
cheers stealth
AKA my wagon thats has no clock or taco just plastic ?
does the wire still exsist back there in the wiring loom?
cheers stealth
Engineering the unfair advantage !
Red bull , fuelling the fastest race cars on earth !
Red bull , fuelling the fastest race cars on earth !
Re: How to install a factory tacho in non tacho GC/ GD.
yes
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
-
- Posts: 728
- Joined: Tue Mar 17, 2009 1:19 am
- Location: Central Coast
Re: How to install a factory tacho in non tacho GC/ GD.
You forgot the knob on the stereo!!!!
*runs and hides*
*runs and hides*
Re: How to install a factory tacho in non tacho GC/ GD.
me i wasnt fortunate to get a decent lense for the tacho, so i got a clock hole in mine
Previous owner of a GC Coupe, a few GSRS and random Sigmas.
Converted to the Ultimate Driving Machines
Converted to the Ultimate Driving Machines
Re: How to install a factory tacho in non tacho GC/ GD.
Haha.C_Fernance wrote:You forgot the knob on the stereo!!!!
*runs and hides*
It was in the console, didn't realise till after the shots were taken...
If you want any sigma-galant.com stickers, then look here for how to get them sigma-galant.com stickers
- mrelshauno
- Posts: 156
- Joined: Tue Sep 04, 2012 6:00 am
Re: How to install a factory tacho in non tacho GC/ GD.
I have just finally gotten around to re-installing mine and have a spare wire with plug and was unsure if it was hooked up in the past. I have checked my other spare dash's and they are all the same, a green and a blue wire together with a plug on the end. There is about 3 bits of green insulation tape wrapped around it at intervals. Here is a pic.
What is this for?
Also, at the bottom left corner of the dash near the ash tray there is another plug with a wire as well. These don't look like they have been used. Does anyone know what they are for? Maybe something to do with aircon as it is below the blank near the heater controls?
My tacho doesn't seem to work either. i might take it in to the auto sparkies to do a quick test on the gauge.
Help please!!!
What is this for?
Also, at the bottom left corner of the dash near the ash tray there is another plug with a wire as well. These don't look like they have been used. Does anyone know what they are for? Maybe something to do with aircon as it is below the blank near the heater controls?
My tacho doesn't seem to work either. i might take it in to the auto sparkies to do a quick test on the gauge.
Help please!!!