Yet another trip to U-Pull-It is over. Ended up getting most of the parts I needed. I found 2x GSR rear spoilers, a red and silver ones. The red one is broken, so I'll use it as a template to make another one in fibre glass, and the silver one just needs a sanding and a paint. Since I wont need the spoiler for a while, I'll be selling the silver spoiler.
I got the proper cam this time, and that is all installed ready to go.
I also got some unbroken centre console parts, including a stock radio. Don't think the radio will work though. Definitely will have to give the interior a really good clean.
Things left to do:
- Make mounting brackets for the intake piping
- Finish accelerator cable mounting bracket
- Solder 2 wires to the connect the Magna loom with the Sigma loom
- Get a hose from the tank to the charcoal canister
- Get a hose for between the brake booster and intake
- Mount the AC bracket and remount the AC and Alternator
- Mount the electric fuel pump
- Put everything back together with gaskets
- Final testing of the loom with the battery in the car
- Plug in and mount the ECU
- Test run of the engine and hope it doesn't explode